Whisper 60 pumps 330 gph and is good for aquariums up to 60 gallons. Measures 13.5 in. V 6 ruk noti live. For more information about the Tetra Whisper 60 Power Filter, see the Manufacturer's Instruction manual. For more info on Hang-on Power Filters, please see Power Aquarium Filter Basics. Dec 15, 2009 - Trying to find a manual for a used tetra whisper 30-60 filter, Tetra website is no help and googling hasn't helped either. I just want to make sure.
Hi Manisha, Obviously remove it from the tank first, but we would recommend you remove the cartridge, etc., and flip it upside down to check the motor. Inspect it for any hair line cracks in the bottom of the filter box, or a pinched red o ring around the motor. Twist the motor to remove it, and inspect it as well. Look for cracks in particular as well as no o ring or a damaged o ring. We recommend you give us a call if you are unable to correct this issue.
We would be happy to help! In the meantime, we will email you. There are lots of ways, but each tank is different and its own slice of nature, so you have to experiment to find what works for it. Expect each method to take some time, and don't make too many changes at once. Here are what we recommend: - reduce feeding to twice a day, one piece of food per fish or what they can eat in less than 30 sec - make sure you are not overstocked, a 10 gallon can hold up to 10' of adult, small fish like tetras or platys, barbs, etc.
So between 3 and 7 fish, depending on the species. - change 30% of the water at least every 30 days by vacuuming the gravel and removing water simultaneously - add Tetra SafeStart Plus to boost your biological filter, this may clear the tank in a few days Good luck, BREX. I believe you posted on Amazon as well, where I answered this question. When a filter backflows, there is a clog somewhere. It can be the cartridge if overfeeding is occurring, or it can be that the filter has pulled debris into the motor region or the impeller. Unplug the filter, remove it from the tank, and take it apart. It may be a simple as hair wrapped around the impeller.
This is a common issue and easily remedied with tweezers. Over time, other things like hard water buildup, algae, sludge, etc., can cause this issue, but I suspect you are either over feeding or some gravel grit is interfering with the impeller, something along these lines. We appreciate your question, but are not sure which filter you are using. The only filter we make for a tank that size is the Whisper 1-3i. It has one tube, a white one at the base with holes throughout it.
It can be rinsed out with hot water. You can use a q tip if necessary to remove any debris. For our HOB filters, you would remove the one intake tube, and run a 'baby bottle' style aquarium brush up inside it, then run cool water through. Also, use a q tip to clean out the motor in the bottom of the filter box, and clean the impeller at the short end of the tube, removing hair, sludge, and so forth. Date published: 2015-12-28 • • y_2019, m_3, d_8, h_23CST • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11 • cp_3, bvpage2n • co_hasquestionsanswers, tq_98 • loc_en_US, sid_26316, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)] • clientName_tetrafish • bvseo_sdk, net_sdk, 3.2.0.0 • CLOUD, getReviews, 130ms • QUESTIONS, PRODUCT • bvseo-msg: The getReviews method is only supported when schema.org is configured for structured markup. Please submit a support ticket at spark.bazaarvoice.com to have your Bazaarvoice configuration updated to use schema.org for structured markup.
- Author: admin
- Category: Category
Whisper 60 pumps 330 gph and is good for aquariums up to 60 gallons. Measures 13.5 in. V 6 ruk noti live. For more information about the Tetra Whisper 60 Power Filter, see the Manufacturer's Instruction manual. For more info on Hang-on Power Filters, please see Power Aquarium Filter Basics. Dec 15, 2009 - Trying to find a manual for a used tetra whisper 30-60 filter, Tetra website is no help and googling hasn't helped either. I just want to make sure.
Hi Manisha, Obviously remove it from the tank first, but we would recommend you remove the cartridge, etc., and flip it upside down to check the motor. Inspect it for any hair line cracks in the bottom of the filter box, or a pinched red o ring around the motor. Twist the motor to remove it, and inspect it as well. Look for cracks in particular as well as no o ring or a damaged o ring. We recommend you give us a call if you are unable to correct this issue.
We would be happy to help! In the meantime, we will email you. There are lots of ways, but each tank is different and its own slice of nature, so you have to experiment to find what works for it. Expect each method to take some time, and don't make too many changes at once. Here are what we recommend: - reduce feeding to twice a day, one piece of food per fish or what they can eat in less than 30 sec - make sure you are not overstocked, a 10 gallon can hold up to 10' of adult, small fish like tetras or platys, barbs, etc.
So between 3 and 7 fish, depending on the species. - change 30% of the water at least every 30 days by vacuuming the gravel and removing water simultaneously - add Tetra SafeStart Plus to boost your biological filter, this may clear the tank in a few days Good luck, BREX. I believe you posted on Amazon as well, where I answered this question. When a filter backflows, there is a clog somewhere. It can be the cartridge if overfeeding is occurring, or it can be that the filter has pulled debris into the motor region or the impeller. Unplug the filter, remove it from the tank, and take it apart. It may be a simple as hair wrapped around the impeller.
This is a common issue and easily remedied with tweezers. Over time, other things like hard water buildup, algae, sludge, etc., can cause this issue, but I suspect you are either over feeding or some gravel grit is interfering with the impeller, something along these lines. We appreciate your question, but are not sure which filter you are using. The only filter we make for a tank that size is the Whisper 1-3i. It has one tube, a white one at the base with holes throughout it.
It can be rinsed out with hot water. You can use a q tip if necessary to remove any debris. For our HOB filters, you would remove the one intake tube, and run a 'baby bottle' style aquarium brush up inside it, then run cool water through. Also, use a q tip to clean out the motor in the bottom of the filter box, and clean the impeller at the short end of the tube, removing hair, sludge, and so forth. Date published: 2015-12-28 • • y_2019, m_3, d_8, h_23CST • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11 • cp_3, bvpage2n • co_hasquestionsanswers, tq_98 • loc_en_US, sid_26316, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)] • clientName_tetrafish • bvseo_sdk, net_sdk, 3.2.0.0 • CLOUD, getReviews, 130ms • QUESTIONS, PRODUCT • bvseo-msg: The getReviews method is only supported when schema.org is configured for structured markup. Please submit a support ticket at spark.bazaarvoice.com to have your Bazaarvoice configuration updated to use schema.org for structured markup.